Operating weight

3,5 - 28 t

Application

The high-tip shovel is suitable for all applications which require high dumping elevations.

Features

  • Optimal fill level with flowing materials by means of front lenticular shovel contour
  • Largest possible inside width of shovel through cylinder boxes set to the rear and recessed bolt locks on the outer side of the shovel for optimum penetration
  • Standard slots and additional bolted covers based on the visual field standard for oversized shovels
  • Hydraulic piping covered in protective casing
  • Two vertical cylinders, set up diagonally in outside boxes at the rear
  • As standard, rubber stops between frame and shovel
  • Blade with straight blade in HB 500 (without teeth)

Extra equipment

  • Shovel body completely in HB 400
  • Reversible screw-on blade in HB 500
  • Adjustable, end-position damped cylinder
  • Lowering brake valve
  • For extra light variant only: version with narrow and lowered frame at rear of shovel available

High-Tip Shovel in use

Note on the variants: The models of the high-tip shovel are graded according to the following bulk weights.

TypeWeight
extra light< 0.8 t/m³
light0.8 - 1.2 t/m³
normal1.2 - 1.6 t/m³
reinforced> 1.6 t/m³

Variants

Model normal
Cutting width 2.100 mm
Capacity SAE 1.200 l

Enquire variant

Model normal
Cutting width 2.200 mm
Capacity SAE 1.500 l

Enquire variant

Model Cutting width Capacity SAE  
leicht 2.300 mm 1.700 l Enquire variant
normal 2.300 mm 1.200 l Enquire variant
Model Cutting width Capacity SAE  
extra leicht 2.400 mm 3.000 l Enquire variant
leicht 2.400 mm 2.300 l Enquire variant
normal 2.400 mm 1.700 l Enquire variant
verstärkt 2.400 mm 1.700 l Enquire variant
Model Cutting width Capacity SAE  
extra leicht 2.500 mm 3.800 l Enquire variant
leicht 2.500 mm 3.000 l Enquire variant
normal 2.500 mm 2.300 l Enquire variant
verstärkt 2.500 mm 2.300 l Enquire variant
Model Cutting width Capacity SAE  
extra leicht 2.700 mm 4.800 l Enquire variant
leicht 2.700 mm 3.600 l Enquire variant
normal 2.700 mm 2.800 l Enquire variant
verstärkt 2.700 mm 2.800 l Enquire variant
Model Cutting width Capacity SAE  
extra leicht 2.980 mm 5.000 l Enquire variant
leicht 2.980 mm 4.200 l Enquire variant
normal 2.980 mm 3.200 l Enquire variant
verstärkt 2.980 mm 3.200 l Enquire variant
Model Cutting width Capacity SAE  
extra leicht 3.200 mm 7.300 l Enquire variant
leicht 3.200 mm 6.200 l Enquire variant
normal 3.200 mm 4.500 l Enquire variant
verstärkt 3.200 mm 4.500 l Enquire variant
Model Cutting width Capacity SAE  
extra leicht 3.600 mm 12.000 l Enquire variant
leicht 3.600 mm 8.000 l Enquire variant
normal 3.600 mm 6.000 l Enquire variant
verstärkt 3.600 mm 6.000 l Enquire variant

Your product watchlist